Iron core shearing machine

Horizontal cutting machine, also known as horizontal cutting line, flat cutting machine, flat cutting line, or horizontal cutting unit. According to its speed, it can be divided into: stop cutting, high-speed cutting, and flying cutting. The cross cutting machine is used to unwind, level, cut metal coils into flat sheets of the required length, and stack them. Suitable for processing cold-rolled and hot-rolled carbon steel, silicon steel, tinplate, stainless steel, and various metal materials after surface coating. The cross cutting machine production line mainly consists of a feeding trolley, an uncoiler, a leveling machine, a feeding mechanism, a shearing machine, a conveying device, a stacking device, etc. A longitudinal cutting machine can be configured in the production line to cut the sheet metal into the required width and length for cutting and stacking.
To improve the service life of the iron core shearing machine, it is generally required to avoid direct sunlight and other thermal radiation, and to avoid places that are too humid, have too much dust, or have corrosive gases. Corrosive gases can easily cause electronic components to corrode and deteriorate, resulting in poor contact or short circuits between components, affecting the normal operation of equipment. Precision CNC cross cutting machines should be kept away from equipment with high vibration, such as punching machines, forging equipment, etc., and should be kept at a certain distance from these devices as much as possible. Enterprises with conditions can independently set up iron core cross cutting workshops.
The iron core shearing machine should avoid direct sunlight and other thermal radiation: it should be avoided in places that are too humid, have too much dust, or have corrosive gases. Corrosive gases can easily cause electronic components to corrode and deteriorate, resulting in poor contact or short circuits between components, affecting the normal operation of equipment. To stay away from equipment with high vibration, such as punching machines, forging equipment, etc., try to keep a certain distance from these equipment. Enterprises with conditions can independently set up transverse cutting workshops.